All your Writing needs covered

[SOLVED] Design of Experiments (DOE)

Calculate the price
of
your order:

275 words
+
Approximate price
$ 0.00

  

Problem #1.

The data correspond to yields (in tons per hectare) of a pasture with 3 levels of nitrogen fertilizers, the design was randomized, applied in 5 plots per treatment (blocks).

You want to know if the performance was different in the treatments.

Check the hypothesis with = 0.01%

   


Nitrogen Levels

 


1


2


3

 

Plot 1


14.823


25.151


32.605

 

Plot 2


14.676


25.401


32.46

 

Plot 3


14.72


25.131


32.256

 

Plot 4


14.514


25.031


32.669

 

Plot 5


15.065


25.277


32.111

Problem #2.

A product development engineer wants to maximize the tensile strength of a new synthetic fiber that will be used to make shirts. From experience, it appears that strength (or strength) is influenced by the% cotton present in the fiber.

It is also suspected that high cotton values negatively affect other quality qualities that are desired (for example: that the fiber can receive a permanent press treatment).

Faced with this situation, the engineer decides to take five samples for different levels of cotton and measure the strength of the fibers thus produced.

   

Cotton %


Observations (strengths of the 25 manufactured fibers)


Total


Average

 

15%


7


7


15


11


9


49


9.8

 

20%


12


17


12


18


18


77


15.4

 

25%


14


18


18


19


19


88


17.6

 

30%


19


25


22


19


23


108


21.6

 

35%


7


10


11


15


11


54


10.8

 

Total sum of the 25 Strength values obtained


376


15.04

     

Problem # 3 Full factorial example

  

Data Source

 

This example uses data from a NIST   high performance ceramics experiment


This data set was taken from an   experiment that was performed a few years ago at NIST by Said Jahanmir of the   Ceramics Division in the Material Science and Engineering Laboratory. The   original analysis was performed primarily by Lisa Gill of the Statistical   Engineering Division. Do the DOE set up and analysis and find the significant   factors affecting your response.

The   original data set was part of a high performance ceramics experiment with the   goal of characterizing the effect of grinding parameters on sintered   reaction-bonded silicon nitride, reaction bonded silicone nitride, and   sintered silicon nitride.

  

Description of Experiment:   Response and Factors

 

Response and factor variables


Purpose: To determine the effect   of machining factors on ceramic strength
  Response variable = mean (over 15 repetitions) of the ceramic strength
  Number of observations = 32 (a complete 25 factorial design)

Response Variable Y = Mean (over   15 reps) of Ceramic Strength
  Factor 1 = Table Speed (2 levels: slow (.025 m/s) and fast (.125 m/s))
  Factor 2 = Down Feed Rate (2 levels: slow (.05 mm) and fast (.125 mm))
  Factor 3 = Wheel Grit (2 levels: 140/170 and 80/100)
  Factor 4 = Direction (2 levels: longitudinal and transverse)
  Factor 5 = Batch (2 levels: 1 and 2)

 

The data


The design matrix, with measured ceramic   strength responses, appears below. The actual randomized run order is given   in the last column. 

speed rate grit direction batch strength   order

1 -1 -1 -1 -1 -1 680.45 17

2 1 -1 -1 -1 -1 722.48 30

3 -1 1 -1 -1 -1 702.14 14

4 1 1 -1 -1 -1 666.93 8

5 -1 -1 1 -1 -1 703.67 32

6 1 -1 1 -1 -1 642.14 20

7 -1 1 1 -1 -1 692.98 26

8 1 1 1 -1 -1 669.26 24

9 -1 -1 -1 1 -1 491.58 10

10 1 -1 -1 1 -1 475.52 16

11 -1 1 -1 1 -1 478.76 27

12 1 1 -1 1 -1 568.23 18

13 -1 -1 1 1 -1 444.72 3

14 1 -1 1 1 -1 410.37 19

15 -1 1 1 1 -1 428.51 31

16 1 1 1 1 -1 491.47 15

17 -1 -1 -1 -1 1 607.34 12

18 1 -1 -1 -1 1 620.80 1

19 -1 1 -1 -1 1 610.55 4

20 1 1 -1 -1 1 638.04 23

21 -1 -1 1 -1 1 585.19 2

22 1 -1 1 -1 1 586.17 28

23 -1 1 1 -1 1 601.67 11

24 1 1 1 -1 1 608.31 9

25 -1 -1 -1 1 1 442.90 25

26 1 -1 -1 1 1 434.41 21

27 -1 1 -1 1 1 417.66 6

28 1 1 -1 1 1 510.84 7

29 -1 -1 1 1 1 392.11 5

30 1 -1 1 1 1 343.22 13

31 -1 1 1 1 1 385.52 22

32 1 1 1 1 1 446.73 29

Problem #4.

Replicate the DOE in the following website. Write a 3-line report with your conclusions

https://asq.org/quality-resources/design-of-experiments

Basic features

  • Free title page and bibliography
  • Unlimited revisions
  • Plagiarism-free guarantee
  • Money-back guarantee
  • 24/7 support

On-demand options

  • Writer's samples
  • Part-by-part delivery
  • Overnight delivery
  • Copies of used sources
  • Expert Proofreading

Paper format

  • 275 words per page
  • 12pt Arial/Times New Roman
  • Double line spacing
  • Any citation style (APA, MLA, CHicago/Turabian, Havard)

Guaranteed originality

We guarantee 0% plagiarism! Our orders are custom made from scratch. Our team is dedicated to providing you academic papers with zero traces of plagiarism.

Affordable prices

We know how hard it is to pay the bills while being in college, which is why our rates are extremely affordable and within your budget. You will not find any other company that provides the same quality of work for such affordable prices.

Best experts

Our writer are the crème de la crème of the essay writing industry. They are highly qualified in their field of expertise and have extensive experience when it comes to research papers, term essays or any other academic assignment that you may be given!

Calculate the price of your order

You will get a personal manager and a discount.
We'll send you the first draft for approval by at
Total price:
$0.00

Expert paper writers are just a few clicks away

Place an order in 3 easy steps. Takes less than 5 mins.